Solar Fuse connector,Fuse-on connector,protection solar connector,

Short Description:

Dongguan Sunyo Photovoltaic Co., Ltd. TUV,CE,RoHS and other certifications. TUV certification prevents personal injury and property damage may caused during use connector,including electric shock, overheating or fire hazard, mechanical aspects of hazardous, radioactive hazards and chemical hazards.


Product Detail

FAQ

Product Tags

Product Details:

Place of Origin: China
Brand Name: SUNYO
Certification: TUV Rhineland, RoHS, CE etc.
Model Number: SY-CF4A

Payment & Shipping Terms:

Minimum Order Quantity: Negotiable
Price: Negotiable
Packaging Details: 50pcs / opp
Delivery Time: 3-5 days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 500000 Pairs / Month

Detailed Product Description

Contact Resistance:

Less Than 0.5 M Ohm

Rated Voltage:

TUV 1000 DC/ UL 600V DC

Test Voltage:

6KV(50Hz,1Min)

Degree Of Protection:

IP68

Compatible Solar Cable:

2.5/4.0 /6.0 Mm² (14/12/10 AWG)

Contact Material:

Copper, Tin Plated

Insulation Material:

PPO

Pin Dimension:

4.0 MM

IP68 Solar Cable Connectors , Corrosion Resistant Solar Panel Connectors

How to Connect MC4 Connectors?

Components

 picture 1. Female Insulated Connector Housing
2. Male Insulated Connector Housing
3. Housing Nut with internal rubber bushing/cable gland (seals wire entry)
4. Female Mating Contact
5. Male Mating Contact
6. Wire Crimp Area
7. Locking Tab
8. Locking Slot – Unlock Area (press to release)

 

SUNYOs solar connectors are compatible for use with AWG #10, AWG #12, or AWG #14 wire/cable with an outer insulation diameter between 2.5 and 6.0 mm.
1) Strip 1/4d of the insulation from the cable end to be terminated with the solar connector using a wire stripper. Be careful not to nick or cut the conductor.

2 )Insert the bare conductor into the crimping area (Item 6) of the metallic mating contact and crimp using a special purpose crimping tool. If a crimping tool is not available the wire may be soldered into the contact.

3 )Insert the metallic mating contact with the crimped wire through the Housing Nut and rubber bushing (Item 3) and into the insulated housing, till the metallic pin fits snug into the housing.

4) Tighten the Housing Nut (Item 3) onto the connector housing. When the nut is tightened, the internal rubber bush is compressed around the outer jacket of the cable and thus, provides water-tight sealing.


Specification Of
Solar solar panel connectors

 

Mc4 Inline Fuse Holder

 

  Product NO. SY-CF4A
Insulation material PPO
Rated Voltage TUV 1000 DC/ UL 600V DC
Rated Current 20A-30A
PV Fuse 10x38mm (1-20A)
Test voltage 6KV(50Hz,1Min)
Contact material copper, tin plated
Contact resistance less than 0.5 m ohm
Degree of protection IP68
Pin dimension 4.0 MM

G of Solar solar panel connectors

DRAWING of Solar Cable Connector

SY-CF4A

Certifications

Dongguan Sunyo Photovoltaic Co., Ltd. TUV,CE,RoHS and other certifications. TUV certification prevents personal injury and property damage may caused during use connector,including electric shock, overheating or fire hazard, mechanical aspects of hazardous, radioactive hazards and chemical hazards.

DRAWING of fuse connector Connector (please contact us)

43

 

 

DRAWING of Solar Cable Connector

 

picture


  • Previous:
  • Next:

  • Write your message here and send it to us